Collimator sight Holosun Paralow HS403B

The collimator reduces aiming time by allowing you to see the illuminated aiming point without having to precisely position your eye on the aiming line and close the other eye. This significantly speeds up the formation of a bias when shooting at moving targets.

Collimator sights are selected to match the weapon, typical tactical tasks and individual characteristics of the shooter. The Holosun Paralow HS 403B collimator is mounted on the weapon with a Picatinny rail (viver).

The Holosun Paralow HS403B collimator must be sighted in. The aiming accuracy after firing is 2 MOA.

The Holosun Paralow HS403B uses Shake Awake™ technology to save battery power. The red dot can “wake up” after shaking the weapon

The Holosun Paralow HS403B has a horizontal and vertical correction mechanism. Correction range: ± 50 MOA. Price per click: 0.5 MOA.

The device has 12 levels of red dot illumination. The aperture, i.e., the diameter of the entrance lens, is 20 mm

The collimator’s tubular housing is sealed and filled with nitrogen, which prevents optics from fogging.

The device is powered by a CR2032 battery, it is advisable always to have a spare battery.

The sight is protected against water, dust, and dirt according to the IP67 standard.

The weight of the collimator is 80 grams.

We recommend installing a damper (price 70-200 UAH) on the AK/RPK simultaneously with the collimator. The damper reduces the mechanical recoil when the sight is fired, thus increasing the service life of the sight. Link to the damper: https://prom.ua

The scope comes with both a high and low mount, a tool kit, a protective case, a rubber cover, a cloth for wiping the optics and a separate case for the spare battery.

To purchase the scope, you need to buy a Picatinny rail for the weapon. For example, the following one: https://bonafence.com

The collimator is a hunting device, not a military one, so it should be protected from mechanical damage. A hunting scope should not fall.

Lenses are extremely sensitive to mechanical damage. Do not touch them with your fingers, remove all dirt with special wipes.

Do not leave the scope in the sun or near heating devices for a long time.

For the needs of exclusively rear air defence, i.e., for firing at air targets without assault, you can buy much cheaper and simpler collimators with a mandatory damper. For example, 1×30 Sniper https://strelok.kh.ua

Other items